Steam trap Totally Explained

Everything about Steam Trap totally explained

A steam trap is a device used to discharge condensate and non condensible gases while not permitting the escape of live steam. Nearly all steam traps are nothing more than automatic valves. They open, close or modulate automatically.
   The earliest and simplest form of steam trap is the orifice trap. It consists of simply a disc or short solid pipe nipple with a small hole drilled through it installed at the lowest point of the equipment. Since steam condensate will collect at the lowest point and this hot liquid is about 1200 times smaller in volume and more dense than live steam, condensate is effectively removed and steam is blocked. The problem with orifice traps is the fact that they don't compensate for varying loads and pressures. If the condensate load increases, liquid will back up in the equipment. If the load is light, then there's little condensate present and live steam will escape through the orifice. Orifice traps won't handle or remove non-condensible gases successfully.
   These basic inabilities have spawned a multitude of steam trap designs and configurations to meet a whole spectrum of applications.
   No single steam trap design is ideal for each and every application. This makes understanding each design's abilities and limitations important in selecting the right trap for the right job.
   Steam traps can be split into three major types:
1. Mechanical traps. They have a float that rises and falls in relation to condensate level and this usually has a mechanical linkage attached that opens and closes the valve. Mechanical traps operate in direct relationship to condensate levels present in the body of the steam trap. Inverted bucket and float traps are examples of mechanical traps.
   2. Temperature traps. They have a valve that's driven on / off the seat by either expansion / contraction caused by temperature change. They differ from mechanical traps in that their design requires them to hold back some condensate waiting for it to cool sufficiently to allow the valve to open. In most circumstances this isn't desirable as condensate needs to be removed as soon as it's formed. Thermostatic traps and bimetallic traps are examples of temperature operated traps.
   3. Thermodynamic (TD) traps. Thermodynamic traps work on the difference in dynamic response to velocity change in flow of compressible and incompressible fluids. As steam enters, static pressure above the disk forces the disk against the valve seat. The static pressure over a large area overcomes the high inlet pressure of the steam. As the steam starts to condense, the pressure against the disk lessens and the trap cycles. This essentially makes a TD trap a "time cycle" device: it'll open even if there's only steam present, this can cause premature wear. If non condensible gas is trapped on top of the disc, it can cause the trap to be locked shut.

Further Information

Get more info on 'Steam Trap'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://steam_trap.totallyexplained.com">Steam trap Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.